MCD500

Khởi Động Mềm Danfoss MCD 500

Giá : 0 đ
Giá khuyến mại: 0 đ
Xuất sứ : Danfoss - Newzealand
Tình trạng : Còn hàng
Đặt mua
Khởi động mềm Danfoss VLT MCD500 là thế hệ sản phẩm mới và hiện đại nhất với đầy đủ các tính năng phù hợp cho các loại động cơ ở tất cả các dãy công suất trong các nhà máy thuỷ sản, kho lạnh, chế biến vật liệu, xi măng, thép, nhà máy nước...
Chi tiết sản phẩm
Đánh giá

MCD500

  • Dãy công suất: 7.5Kw – 800Kw
  • Điện áp: 3PH (200-575V / 200-690V)
  • Cấp bảo vệ: IP00/ IP20
 

 

Feature MCD500
Voltages Control Supply Voltage 24 VDC or AC or 100 ~ 120 VAC or 220 ~ 240 VAC
Line Voltage 200 ~ 525 VAC or 380 ~ 690 VAC
Control Inputs and Outputs Digital Inputs 3 non-programmable

1 programmable

Relay Outputs 3 programmable
Analog Output 1 programmable
Motor Thermistor Yes
Configuration Internal Bypass Yes, up to 110 kW
Inside Delta (6-wire connection) 58% -1,2MW Yes
Kickstart Yes
DC Brake Yes
User Interface Display Graphical LCD
Text Yes
Language Up to 8
Menus Yes
Setup and test tools Yes
Comms Profibus Yes (option)
DeviceNet Yes (option)
Modbus Yes (option)
USB YES (option)
Current Limit Yes
AAC (Adaptive Acceleration Control) Yes
Additional Protection Programmable input trip, Individual phase loss trips, Individual shorted SCR trips, Int. bypass relay overload and Int. bypass relay fail Yes
DC output 24 VDC, 200 mA Yes
Clock Real time clock Yes
Batery backup

 

– Lithium, 10year lifetime Yes
Hardware options Forthcoming field-fit hardware options Via the comms port

VLT® Soft Starter MCD 500

VLT® Soft Starter MCD 500 is a total motor starting solution.
Current transformers measure motor current and provide feedback for controlled motor ramp profiles.
AAC, the Adaptive Acceleration Control automatically employs the best starting and stopping profile for the application.

Features and benefits

Power range 
21 – 1600 A, 7,5 – 800 kW
(1,2 MW inside Delta Connection) Versions for 200 – 690 VAC

AAC, the Adaptive Acceleration Control automatically employs the best starting and stopping profile for the application. Adaptive Acceleration Control means that for each start and stop, the soft starter compares and adapts the process to the chosen profile best suited to the application.

The VLT® Soft Starter MCD 500 has a four-line graphical display and a logic keypad making programming easy. Advanced setup is possible displaying operational status.
Three menu systems: Quick Menu, Application Setup and Main Menu provide optimum programming approach.

Start and stop
Adaptive Acceleration Control (AAC)Current limit start
Current ramp start
Dual parameter function
Kick-start
Jog
Adaptive Deceleration Control (AAC)
TVR soft stop (Timed Voltage Ramp)
Coast to stop
DC brake function – three phase
Soft brake function

Protection 
As MCD 202 +
Under current
Current imbalance
Starter overtemperature
Restart delay
Warning before trips
Adjustable phase imbalance sensitivity
– Programmable input trip
– Individual phase loss trips
– Individual shorted SCR trips
– Int. bypass relay overload
– Int. bypass relay fail
Fully adjustable protectiont Network communication timeout Heatsink overtemperature Battery/clock failure Supply frequency External trip

Outputs 
Three output relays:
1 programmable Programmable analogue output
Motor thermistor

Accessories

VLT® Soft Starter MCD 500 is wall mountable, however, a remote Operator module allows for remote control, and motor performance monitoring makes it ideal for panel installation.

-Inside delta wiring kit

– Software for sizing,
control and monitoring

Control 
8 language graphical display and keypad
Quick menu and appplication menu Buttons for start, stop, reset and remote control
Inputs for two- or three-wire control

Optional:
Modules for serial
communication
Remote operator kit
PC software

Other 
Bypass up to 110 kW
Configurable bus bars from 360 A and up
Operation timers
Jog – slow speed operation
Auto reset of fault situations
Emergency run (Fire mode) 99 event log Trip log
User programmable metering and monitoring
Simulation before connecting line voltage